Part Number Hot Search : 
JPJ1018 BIMM111 LC7410 ISB35000 CDB5346 IRF82 LV320ML BIMM111
Product Description
Full Text Search
 

To Download IN74LV138N Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TECHNICAL DATA
IN74LV138 3-to-8 line decoder/demultiplexer; inverting
The IN74LV138 is a low-voltage Si-gate CMOS device and is pin and function compatible 74HCT138. The74LV138 accepts three binary weighted address inputs (A 0,A 1,A 2) and when enabled,provide 8 - mutually exclusive active LOW outputs (Y0 to Y7). The "138" features three enable inputs: two active LOW (CS2,CS3 and one active HIGH (CS1).Every output will be HIGH untess CS2, and CS3 are LOW and CS1 is HIGH. * * * * * * Optimized for Low Voltage applications:1.2 to 3.6 V Demultiplexing capability Multiple input enabte for easy expansion Ideal for memory chip select decoding Active LOW mutually exclusive outputs Output capability: standard
16 1 16 1 D SUFFIX SOIC N SUFFIX PLASTIC
ORDERING INFORMATION IN74LV138N Plastic IN74LV138D SOIC TA = -40 to 125 C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs CS1 CS2 CS3 XXH XHX LXX PIN 16 =VCC PIN 8 = GND H H H H H H H H L L L L L L L L L L L L L L L L A2 A1 A0 XXX XXX XXX LLL LLH LHL LHH HLL HLH HHL HHH Outputs Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 H H H HHHHH H H H HHHHH H H H HHHHH L H H H H H H H H L H H H H H H H H L H H H H H H H H L H H H H H H H H H H H H H H H H H H H H
LHHH HLHH HHLH HHHL
H = high level (steady state) L = low level (steady state) X = don't care
INTEGRAL
1
IN74LV138
MAXIMUM RATINGS
Symbol VCC IIK IOK IO ICC Tstg PD
*
Value -0.5 to +7.0 20 50 25 50 -65 to +150 750 500 260 C VI< - 0.5 or VI> Vcc+0.5V VO< - 0.5 or VO> Vcc+0.5V -0.5AParameter DC supply voltage DC input diode current DC output diode current DC output source or sink current DC VCC or GND current for types with standard outputs Storage Temperature Power Dissipation per package Plastic DIP+ SOIC Package+ Lead temperature, 1.5 mm from Case for 4 seconds (Plastic DIP ), 0.3 mm (SOIC Package)
TL
*
Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. +Derating - Plastic DIP: - 12 mW/C from 70 to 125C SOIC Package: : - 8 mW/C from 70 to 125C
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VIN, VO TA tr, t f DC supply voltage DC input voltage, DC output voltage Operating ambient temperature range in free air Input rise and fall times except for Schmitt-trigger inputs Vcc= 1.0 ? 2.0A Vcc= 2.0 ? 2.7A Vcc= 2.7 ? 3.6A Vcc= 3.6 ? 5.5A Parameter Min 1.0 0 0 -40 0 0 0 Max 5.5 VCC VCC +125 500 200 100 50 Unit V V V C ns/B
This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or VOUT)VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open.
INTEGRAL
2
IN74LV138
DC ELECTRICAL CHARACTERISTICS
Symbol Parameter Test Conditions VCC, A 25C min VIH High-level input voltage 1.2 2.0 2.7 to 3.6 4.5 to 5.5 1.2 2.0 2.7 to 3.6 4.5 to 5.5 -I0=100A VIH or VIL 1.2 2.0 2.7 3.0 3.6 4.5 5.5 3.0 4.5 1.2 2.0 3.0 3.0 4.5 5.5 5.5 0.9 1.4 2.0 0.7 Vcc 1.85 2.55 2.85 3.45 4.35 5.35 2.48 3.70 max 0.3 0.6 0.8 0.3 Vcc Guaranteed Limit io -40C to 85C min 0.9 1.4 2.0 0.7 Vcc 1.8 2.5 2.8 3.4 4.3 5.3 2.40 3.60 max 0.3 0.6 0.8 0.3 Vcc io -40C to 125C min 0.9 1.4 2.0 0.7 Vcc 1.8 2.5 2.8 3.4 4.3 5.3 2.20 3.50 max 0.3 0.6 0.8 0.3 Vcc A Unit
VIL
Low -level input voltage
A
VOH
High-level output voltage
A
VIH or VIL -IO=6.0 mA -IO=12.0 mA VOL Low-level output VIH or VIL voltage I0=100A
B
0.15 0.15 0.15 0.33 0.40 0.1 8.0
0.2 0.2 0.2 0.40 0.55 1.0 80
0.2 0.2 0.2 0.50 0.65 1.0 160
B
VIH or VIL IO=6.0 mA IO=12.0 mA II ICC Input leakage current Quiescent supply current VCC or GND VCC or GND IO=0
B
-
-
-
ieA ieA
INTEGRAL
3
IN74LV138
AC ELECTRICAL CHARACTERISTICS (CL=50 pF, tLH = tHL = 2.5 nc, VIL=0B, VIH=VCC)
Symbol Parameter VCC V 25C min tPLH, t PHL Propagation delay, input A to output Y (Figures 1) 1.2 2.0 2.7 3.0 4.5 1.2 2.0 2.7 3.0 4.5 max 150 33 23 19 14 170 35 26 21 17 170 35 26 21 17 7.0 Guaranteed Limit io -40C to 85C min max 150 36 26 21 16 170 39 29 23 19 170 39 29 23 19 io -40C to 125C min max 180 44 33 26 20 200 49 36 29 24 200 49 36 29 24 ns Unit
tPLH, t PHL
Propagation delay , CS1 to output Y (Figures 2) Output transition time, CS2 or CS3 to output Y (Figures 3)
-
-
-
ns
tPLH, t PHL
-
-
-
ns
CIN
Input capacitance
5.0 O=+25 iN
pF
Power dissipation capacitance (per enabled output) CPD Used to determine the no-load dynamic power consumption: PD=CPDVCC2f+ICCVCC
Typical @25C,VCC=5.5 V 90 pF
tr
INPUT A Vcc 50% GND OUTPUT Y INPUT CS1 90% 50% 10%
tf
Vcc GND
tPHL
OUTPUT Y 50%
tPLH
tPHL
90% 50% 10%
tPLH
Figure 1. Switching Waveforms
Figure 2. Switching Waveforms
INTEGRAL
4
IN74LV138
tr
INPUT CS2,CS3 90% 50% 10% Vcc GND
DEVICE UNDER TEST OUTPUT C
*
TEST POINT
tPHL
OUTPUT Y 90% 50% 10%
tPLH
L
* Includes all prode and jig capacitance
Figure 3. Switching Waveforms
Figure 4. Test Circuit
EXPANDED LOGIC DIAGRAM
INTEGRAL
5
IN74LV138
INTEGRAL
6
IN74LV138
CHIP PAD DIAGRAM
1.4+-0.03 Chip marking LV138 15 14 13 12 11 10
16 01 Y 02 (0,0) 03 X 04 05
09 08 07 06
Location of marking (mm): left lower corner x = 0.950, y = 1.175; Thickness of chip:0.46 0.02 mm
PAD LOCATION
Pad Pad Name X No. 01 AO 0.118 02 A1 0.118 03 A2 0.395 04 CS2 0.709 05 CS3 0.877 06 CS1 1.191 07 Y7 1.191 08 GND 1.191 09 Y6 1.191 10 Y5 1.084 11 Y4 0.798 12 Y3 0.640 13 Y2 0472 14 Y1 0.314 15 Y0 0.131 16 Vcc 0.118 Note: Pad location is given as per passivation layer Y 0.429 0.115 0.115 0.115 0.115 0.115 0.283 0.441 0.599 1.111 1.111 1.111 1.111 1.111 1.111 0.597 Pad size (mm) 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100 0.100 x 0.100
INTEGRAL
1.33+-0.03
7
IN74LV138
INTEGRAL
8


▲Up To Search▲   

 
Price & Availability of IN74LV138N

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X